Choose the one that fits you. Not sure? We tell you from photos.
New copper replaces the aluminum and old wires.
For: damaged wiring or a full renovation.
$17,000 to $27,000
2,400 sq. ft. house, plaster walls, before taxes.
See the two packagesWe keep the aluminum and redo every connection.
For: aluminum in good condition, insurer's request.
By quote
Depends on the number of outlets, switches and light fixtures.
See the methodNot sure which option is right?
Send three photos: the panel, an outlet, the letter from your insurer. A master electrician answers you.
Master electrician, CMEQ licence 5880-1457. Montréal, Laval and the North Shore.
Choose a solution, then tap a marker.
The aluminum and old wires come out, new copper goes in.
They are connected to the new copper wiring.
Every light fixture is connected to the new copper wiring.
One room a day, and you stay home. You receive a letter for your insurer.
The aluminum wiring stays in your walls. A damaged or overheated cable has to be replaced: we tell you so in writing.
Each one is opened. A copper lead is joined to the aluminum with a COPALUM crimped connector.
The same crimped connector at every light fixture. A box too small for the connector is enlarged or replaced.
You receive a letter of compliance signed by the master electrician, for your insurer.
Aluminum Copper
See the two packagesSee the methodChoose your package, then add what you need. You get the firm price in writing.
Materials included
Included in this package
New copper wiring
Targeted openings, decided with you beforehand
Labelled wall cut-outs, handed back to you
You close up yourself, or with your plasterer.
Materials included
Included in this package
Everything in the Essential package
Cut-outs put back in their original place
Plaster applied at the end of the day
The room is closed up the same evening.
Not included in either package: finishing, painting and asbestos testing.
Optional, with either package
In the rooms
Outdoors
At the panel
Your selection
Package: Comfort
We close the walls.
The aluminum wire is not the problem: its connections are what heat up. We redo every connection with COPALUM crimping, without replacing the cable.
Before
Aluminum screwed on directly
After
Aluminum Crimped connector Copper
We open
Every outlet, switch and light fixture.
We crimp
Copper to aluminum, COPALUM connector.
We check
Every connection, before closing up.
We certify
Letter of compliance for your insurer.
Your selection
Aluminum connection correction
Price by quote, based on the number of outlets, switches and light fixtures.
What we do
Every outlet, switch and light fixture is opened
A length of copper is joined to the aluminum with a COPALUM crimped connector
The crimping is done with the manufacturer's tool, by a certified installer
Letter of compliance signed by the master electrician, for your insurer
What to know before choosing
The aluminum wiring stays in your walls
A damaged or overheated cable must be replaced: we tell you so in writing
A box too small for the connector is enlarged or replaced
First ask your insurer, in writing, which repair it accepts
Six situations we correct, in lived-in homes and plexes.
Seen on our inspections



Something else? Describe it in your request.
A price to “replace the wiring”, with no details. Here is what our quote puts in writing from the start.
Send it as a photo or a PDF. You can hide the contractor's name. You get a written comparison, point by point.
How many openings in your walls, and where?
As few as possible. The cable route and every opening are decided with you before work starts.
Who closes the walls?
You or us, depending on your package. Finishing and painting are not included, and that is in writing.
How many days, and in which rooms?
One room per day. The schedule is set with you before the first day.
What about dust?
Captured at the source. The room is sealed off and a negative-pressure vacuum runs while we open the wall.
What document will you get at the end?
A signed attestation of compliance. You receive it 24 hours after the work.
Can the price change along the way?
No. Firm price, in writing. Any addition goes through a change order that you approve first.
Attach the other quote: you get a written comparison, then our price.
Step 1 of 7Before the work
We survey your walls and circuits on site. With you, we choose the cable route that needs the fewest openings.
Step 2 of 7Before the work
The day for each room is set with you before work starts. Occupants and tenants stay in place.
Step 3 of 7Each day, one room
A tarp on the floor, the room sealed off. A negative-pressure vacuum captures dust at the source.
Step 4 of 7Each day, one room
Small openings, for example 4 in., at the spots on the plan. The piece removed, the cut-out, is labelled so it goes back in its place.
Step 5 of 7Each day, one room
With new outlets and switches. Power every evening.
Step 6 of 7Each day, one room
Comfort: cut-outs put back, plaster applied at the end of the day. Essential: your cut-outs are handed back to you.
Step 7 of 7After the work
You receive your attestation of compliance 24 hours after the work.
No opening is improvised: each one is on the plan decided with you before the first day. The less we open, the less finishing is left for you.
Firm price, in writing.
Payment plan, for all our contracts
Financing subject to eligibility: certain criteria apply and are checked with you before signing.
2% of our profits are given back. At payment, you choose to whom. See the three organizations
I consider myself exceptionally fortunate to have hire such a remarkable company for this large project.
Already have a quote to fix what your inspection report or your insurer flagged? Attach it. You get a written comparison, then our price.

We do the electrical part of your conversion: load calculation, circuits, baseboard heaters and convectors, power supply for an electric furnace or a heat pump. Interest-free payment plan: 50% at the time of the work, the balance in monthly payments.
For your insurer, your buyer or your notary.
A master electrician attests to what was seen, measured and corrected. He does not “certify”: a letter that promises more can be turned against you.
Ask every electrician, us included. Here are our answers.
A few clues: a house built before 1980, two-prong outlets, a fuse panel, an inspection report or an insurer's letter that mentions it. To know for sure, a master electrician has to look at the installation: that is the purpose of our electrical code compliance inspection.
There are two answers. Installing GFCI protection at the start of the circuit protects people, but the outlet remains ungrounded and the note may come back in the next report. Replacing the cable with grounded copper fixes the problem at the source. Send us the pages of the report: we tell you in writing what suits each circuit.
It means correcting what, in the wiring of an existing home, does not meet the Code: old wiring, hidden splices, circuits shared between two dwellings, aluminum wiring to replace. We do not do new construction.
Yes. The Code requires a junction box to stay accessible. Hidden behind a wall, it can no longer be checked. We find it, then make it accessible or reroute the cable.
The wire itself is not the problem. Its connections, at outlets and switches, can loosen and heat up over the years. That is why insurers ask for a correction.
No law requires it: installed between 1965 and 1979, it met the code of the time. Insurers are often the ones asking for a correction. Two solutions exist: replacing the wiring with copper, which settles the matter for good, or keeping the wiring and redoing every connection with COPALUM crimping. Ask your insurer, in writing, which one it accepts. Compare the two solutions
Yes. COPALUM is a crimping process reserved for installers certified by its manufacturer, TE Connectivity. Every connection between the aluminum and the copper is crimped with the manufacturer's tool. Send us your insurer's written request: we confirm in writing, before the work, that our quote meets it.
No. We work one room at a time, with temporary outlets so you have power every evening.
It depends on the house and the package. Benchmarks from our quotes: for a 2,400-square-foot single-family home with plaster walls, a complete rewiring runs between $17,000 and $27,000 before tax; a complete floor, between $15,000 and $24,000. These are estimates: your firm price is given to you in writing after we review your photos, or after a visit.
Sanding and finish painting, asbestos testing and decontamination, decorative light fixtures, Hydro-Québec fees and municipal permits. It is written in every quote. If a suspect material is found during the job, the affected work stops until a test result comes back.
50% at the start of the work, then the balance in monthly instalments: over 3 months under $6,000 and over 12 months from $6,000 to $11,999, interest-free; over 24 months from $12,000, at 3% annual interest. Subject to eligibility. By Interac e-Transfer, credit card or cheque. Travel costs are included. Any addition during the job goes through a written change order, which you approve before it is carried out.
Photos, the electrical pages of your inspection report, your insurer's letter. None of that? Describe the situation, that's enough.