Your choice has an impact: 2% of our profits are given back. See how
FR

Heating conversion to electric From oil or gas to electricity, one room a day.

We do the electrical work. Our heating partners supply and install the appliance. One request: you receive both quotes at the same time.

See my subsidy and my price or 438 805-9862

Firm price in writing. Master electrician, CMEQ licence 5880-1457 and RBQ licence 5887-1153-01.

One request, two quotes

Artémis

The electrical workLoad calculation, circuits, baseboard heaters, panel and electrical service.

ASC ConfortPlombier Expert

The heating applianceHeat pump or electric furnace, supplied and installed by our partners.

Both prices arrive at the same time.

Your project in two choices.

See the financial assistance for your project, then request your price in one minute.

1. Your heating today

2. What you are installing

Which heat pump?

Its heating capacity at −8 °C, in BTU/h

With or without a heat pump?

Your gas heating

Dwellings heated by this system

Are you also replacing a gas water heater?

Estimate only: the organization that pays the assistance confirms your eligibility and the amount. Rates consulted on November 13, 2026.

See the rates used and the sources
AssistancePublished amountMain condition
LogisVert, heat pump$50 per 1,000 BTU/h at −8 °C, or $120 for a “cold climate” modelOwner. New appliance, ENERGY STAR certified, bought in Québec.
LogisVert, thermal storage unit$15,000, or $22,000 with a central heat pumpReplacement of a central heating system, by a company authorized by Hydro-Québec.
Chauffez vert, dual-energy component, furnace$6,800 for 1 dwelling, $7,700 for 2, $8,200 for 3You keep gas for the coldest days. Dual-energy rate for 10 years.
Chauffez vert, dual-energy component, boiler$3,600 for 1 dwelling, $3,800 for 2, $3,900 for 3. Plus, for the required electrical work: up to $2,200 ($2,400 for 2 or 3 dwellings) for the panel, and up to $5,600 for the serviceSame conditions. The assistance for electrical work does not exceed its cost.
Chauffez vert, dual-energy component, water heater$250 per dwellingReplaced at the same time as the heating.
Electric furnace, baseboard heaters, circuitsNo assistance found

Sources: hydroquebec.com, LogisVert for residential customers and quebec.ca, Chauffez vert, dual-energy component (participant's guide of April 1, 2026). Chauffez vert assistance does not exceed 80% of the cost of the work, or $20,000 per house.

Your estimate

—

First tell us how you heat today.

Three packages. You choose yours.

Does your home have air ducts? That is what decides. Otherwise, we advise you.

  • No air ducts

    Room-by-Room package

    A baseboard heater or a convector and a thermostat in each room.

    • New circuits, run from the panel
    • Baseboard heaters or convectors installed and connected
    • Openings closed and plastered
    Choose this package
  • With air ducts

    Central package

    An electric furnace replaces yours, on the same ducts.

    • Dedicated circuit, breaker and disconnect
    • Load calculation for the whole house
    • Furnace supplied and installed by our partners
    Choose this package
  • To heat and cool

    Heat Pump package

    A heat pump heats in winter and cools in summer.

    • Power supply for the heat pump and the backup heat
    • Load calculation for the whole house
    • Heat pump supplied and installed by our partners
    Choose this package

We open, we run the wire, we close up.

Often, a quote doesn't say how the walls will be opened, or how they will be closed. Ours does, in writing.

  • About one day per room
  • You stay home
  • Clean every evening

The Artémis job-site method

How we open, how we close: it's written in your quote.

  • Dust is captured at the tool, as the cut is made.

  • The room being worked on is sealed and kept under negative pressure: its air does not escape to the rest of the dwelling.

  • Floors and furniture are covered before the first opening.

  • Small openings, where the cable runs. They are closed up and get a coat of plaster.

  • One room at a time. You stay home, and so do your tenants.

  • Load calculation done first, price in writing. 50% at the start of the work, the balance over 3 or 12 months interest-free, or over 24 months at 3% annual interest.

Payment plan, for all our contracts

A code-compliant installation, without paying it all at once.

  1. A firm price, in writingInstalments and dates in your quote.
  2. Half at the start of the work50% of the contract.
  3. The balance, month by monthOver 3, 12 or 24 months.
  • Under $6,0003 monthsInterest-free. Example: $3,600, that is $1,800 at the start of the work then 3 instalments of $600.
  • From $6,000 to $11,99912 monthsInterest-free. Example: $8,400, that is $4,200 at the start of the work then 12 instalments of $350.
  • $12,000 and over24 months3% annual interest. Example: $18,000, that is $9,000 at the start of the work then the $9,000 balance over 24 months.

Financing subject to eligibility: certain criteria apply and are checked with you before signing.

Request a quoteWritten agreement, signed before the work.

2% of our profits are given back. At payment, you choose to whom. See the three organizations

5,0★★★★★6 Google reviews · 5.0 on Soumission Rénovation
I consider myself exceptionally fortunate to have hire such a remarkable company for this large project.
Colin Bauer · Knob-and-tube wiring replaced · century-old home · Google review
Read the reviews

No time? Leave your number and we'll call you back.

By sending, you agree to be called back about your request. Privacy policy

See alsoWiring code upgradeElectrical service upgrade to 200 AEV charger installation

Questions and details

Can your panel carry the heating?

We do the load calculation before giving you a price. The result is written in your quote.

See the upgrade to 200 A

  1. Your service is sufficientWe add the circuits.
  2. Your panel is fullWe replace it, or we add a subpanel.
  3. Your service is too smallWe upgrade it to 200 A, including the steps with Hydro-Québec.

You install the appliance. We do the electrical part.

Heating, air-conditioning and refrigeration contractors

Do you install heat pumps, electric furnaces or electric boilers? We do the load calculation and the power supply for your clients, and we work around your dates.

  • Written load calculation, before you order the appliance
  • Power supply for the heat pump, the electric furnace or the electric boiler
  • RBQ licence 5887-1153-01, subcategory 16, CMEQ member

Frequently asked questions

Can I replace my oil furnace with another oil furnace?

No, in most homes. In Québec, in a residential building of no more than 600 m² and three storeys or fewer, an oil-fired appliance can no longer be replaced with a fossil-fuel appliance, natural gas included, or receive a major repair. It must be replaced with a renewable-energy system, such as electricity.

Do walls have to be opened to install electric baseboard heaters?

Yes, in a few places: each baseboard heater needs a circuit that runs from the panel. We make small openings where the cable has to run, then we close them up and apply a coat of plaster. Sanding and finish painting are not included.

Do I have to leave the house during the work?

No. We work one room at a time, in lived-in dwellings, with or without tenants. The room being worked on is sealed and kept under negative pressure, and dust is extracted at the source, at the tool.

How long does the work take?

For baseboard heaters or convectors, count about one day per room. The number of days therefore depends on the number of rooms to heat.

Is there a subsidy to convert your heating to electricity?

It depends on what you install. For a heat pump, Hydro-Québec's LogisVert assistance is $50 or $120 per 1,000 BTU/h depending on the model. If you keep gas for the coldest days, the dual-energy component of Chauffez vert pays from $3,600 to $8,200 depending on the system and the number of dwellings, and can pay part of the panel and the electrical service in the case of a boiler. For an electric furnace or baseboard heaters alone, we found no assistance, and the Chauffez vert assistance for heating oil has been closed since March 31, 2026. The calculator on this page does the math for you.

Is my 100-amp panel enough for electric heating?

It depends on what the house already uses. For a few baseboard heaters, often yes. For a central electric furnace of 15 to 20 kW, which draws 63 to 83 amps, a 200 A service is often needed. The load calculation gives the answer, and it is written in your quote.

Electric furnace or baseboard heaters: which to choose?

If your house already has air ducts in good condition, the electric furnace reuses them. Without ducts, or with a boiler and radiators, baseboard heaters and convectors avoid installing any and let you control each room.

Do you sell the heat pump or the electric furnace?

No. The appliance is sold and installed by our heating partners, ASC Confort and Plombier Expert. You make a single request on our site: with your consent, we forward it to them, and you receive their quote at the same time as ours. Baseboard heaters and convectors are supplied and installed by us.

Who removes the gas or oil appliance?

A contractor specialized in gas or oil. We never touch the fuel. We do the electrical part and coordinate the dates with that contractor.

How much does a heating conversion to electric cost?

The price depends on the package, the number of rooms to heat and the condition of your electrical service. We give you a firm price in writing after seeing your photos, or after a visit if they are not enough. You can spread the payment, subject to eligibility: 50% at the start of the work, then the balance in monthly instalments, over 3 months under $6,000 and over 12 months from $6,000 to $11,999 interest-free, or over 24 months from $12,000 at 3% annual interest.

Can the gas water heater and stove be replaced too?

Yes. We install the circuits for an electric water heater and an electric range. They are counted in the load calculation.

Does the electrical panel have to be changed to install a heat pump?

Not always. It depends on the free space in the panel and on what the house already uses. The load calculation tells us. If the panel is full, we replace it or add a subpanel.

Does electric heating trip the breakers in an old house?

Not if it is installed on circuits designed for it. Each baseboard heater, each furnace and each heat pump gets a dedicated circuit, sized for its wattage. That is what we install.

CallRequest a quote